ETERVO Oy, the company behind ISOBUS Block
ISOBUS control for implement manufacturers.
You build the machine. We take care of the ISOBUS control.
ETERVO Oy develops and maintains the software, the Virtual Terminal interface and the integration with your machine. It runs on hardware designed, tested and built in Finland, with its approvals already in place. We support it for as long as the machine is in production.
or write to [email protected]
Virtual Terminal interface
An interface for your machine.
We design the screens and write the control logic behind them. Both are built around your machine and the way you want it to work. Our experience with operator interfaces keeps the screens simple to use in the cab.
Example screens, designed by us. Customer projects are confidential, so customer machines and screens are not shown here.
What we take care of
- ISOBUS
- Virtual Terminal, AUX-N and Task Controller, built on AEF certified ISOBUS software libraries. AEF certification of your finished machine is a separate step.
- Testing
- Tested on real tractors, not only against the standard. Terminals from different brands behave differently on ISOBUS, and we know those differences before your machine meets them.
- Test bench
- We build a test bench with the same sensors and valves as your machine, wired the same way, and test the software on it before delivery.
- Support
- Firmware, integration and updates, for as long as the machine is in production.
The hardware approvals are done.
We select the control unit to fit the inputs and outputs your machine needs. The units we use are CE marked, hold the E17 automotive EMC approval and comply with RoHS 2. Their EMC testing is already done, so you do not pay for it or wait for it.
- CE marked
- Automotive EMC approval
- RoHS 2 compliant
IP69
Sealed housing
Aluminium
Full metal housing
Finland
Designed, tested and built
Rated for mechanical shock, vibration, heat, cold and chemical exposure.
How a project works
- What we need
Your requirements
How the machine should work and how the operator controls it. Plus the electrical and hydraulic schematics, or an I/O table.
- Time
2–3 months
That covers most projects. A simple machine can be done in one month, a complex one takes six or more.
- Volume
Small or large
Small series and large series are both fine.
- Price
By complexity
The price follows the complexity of the project, and it is competitive.
- Ownership
Per project
Code ownership and licensing are agreed per project.
- Private label
Your brand
The ISOBUS Block 8 and 32 channel relay modules are also available under your own brand.
You know your implement.We know ISOBUS.
Eetu Tervo, founder of ETERVO Oy
or write to [email protected]